6. Adjistments on Switching Regulator
P.C. Board (See Fig. 3)
Caution: The line voltages should be
set within the limits. Failure to do so may result in destruction
of the IC's.
- To check the output voltages,
measure them on the D-connector, the G-connector, or the
N-connector. (See the cable block diabram, AAR00179 in
this manual.)

- + 5V VR... Pot for adjusting 5V
line voltage (Adjustable range: 4.5V - 5.5V DC)
- - 5V VR... Pot for adjusting 5V
line voltage (Adjustable range: -5.5V - -4.5V DC)
- + 12V VR... Pot for adjusting
12V line voltage (Adjustable range: 10.8V - 13.2V DC)
 |
7 |
 |